Velkoobchodní zboží
Skladem
ks
VISE

VISE RAPID CURE BALL PLUG KIT (2 GALLON) viac

Kód produktu: 240-10-200200Doprava a platba

 

Sada obsahuje:

 

  • 128 oz pryskyřice (4x32 oz) w / New Yorker Tops 
  • 128 oz tužidlo (4x32 oz) w / New Yorker Tops 
  • 4 plastové míchací kelímky
  • míchací tyčinky
  • 30 sekundová doba na míchání, ztvrdnutí za 5 minut, doba vytvrzení 1 hodina.

Vyschne, takže barvy zůstanou věrné. (K barvení lze použít kterékoli barvivo Vise).

1 láhev= 32 oz


Kit Includes:
128 oz Resin w/ New Yorker Tops
128 oz Hardener w/ New Yorker Tops
4 Plastic Mixing Cups and Stirring Sticks

30 second Mix Time
Hardens in 5 Minutes
1 Hour Cure Time
"Dries Clear so Colors Stays True"
Plug an Entire ball 1 1/2 Hours
Fingers, Thumb, Weight Hole

 

Vise Rapid Cure is a fast setting ball plug that actually cures clear (if no color pigment is used to influence the plug's color).

A few drops from any of the colors in Vise's Color Kit is all that is needed to help you achieve color-matching. Since Vise Rapid Cure cures to "clear" the is virtually no learning cure associated with "spot-on" color matches.

Rapid Cure is a 2 gallon kit that is packaged in 4 quart-sized bottles of "A" and 4 quart-sized  bottles of "B." This greatly increases the useful life on unused product because your "shelf-life" meter doesn't start ticking until the bottle's seal has been broken. We have exchanged the pumps for "Yorker Tops" that also enhances shelf life and product quality. Pumps dispense fluids on the down-stroke and bring in outside air on the up-stroke. That outside air also contains any humidity (moisture) that is present in the air and as all of us who have time in the pro shop know: urethane and humidity are not friends.

Anytime you have had an issue with "foamy" ball plug, it is because moisture as been introduced into the bottle. This is why we removed the pumps and stress the importance of keeping the lids on the "Yorker Tops" securely in place when you are not dispensing ball plug into a mixing cup. Rapid cure is packaged under controlled conditions to insure that no moisture is present in the bottle when we seal it.


If you somehow allow moisture to gain access into either part  "A" or "B", you will see the results in foamy plug jobs. Once this happens you should simply toss the open bottles of "A" and "B" and open a new pair of quarts. This is another reason why we chose to package Rapid cure in quarts. If moisture contaminants the opened bottles, the most you sand to loose is no more than a quart each of "A" and "B." When moisture is permitted to infiltrate plug materials packaged in gallon bottles, you could lose the entire 2 gallon kit.

 

Homepage: https://www.viseinserts.com/